The EditorGT is probably the most integrated inkjet controller in the market. Reason being, that the tracker board, encoder boards and I/O-boards are all plug-in cards, everything in the PC !!!.
However, you always have to have the jumpers right in the motion board for the type of inkjet you will plug in !
FOR EXAMPLE: IF YOU PLUG-IN AN A400 RJ45 PRINTGO CABLE (USER PORT) INTO A SOCKET THAT WAS SETUP FOR A GT-JET OR SR50, YOU WILL DAMAGE THE A400 ELECTRONIC BOARD !!! YOU JUST BURNED 5,000 US$
The user port of Domino inkjets carries 12 VDC or 5 VDC depending on the jumpering inside the inkjet. The GT controller carries 24 VDC. Either way, by connecting an inkjet to the controller with different power you damage something.
Always consult the GT manual for the proper jumpering and label the back of the motion board accordingly.
Nobody gets hurt because of 24 VDC / 12 VDC but the wait, trouble, and spares cost a lot of money.