Graph Tech USA
Ask Markus
Support Center
SEarch for commonly asked questions
Printing Thousands of Variable Bitmaps with the Raptor or Domino-K600 Replacing a Kodak
Printing Thousands of Variable Bitmaps with the Raptor or Domino-K600 Replacing a Kodak We replaced a Kodak inkjet with a K600. We want to print thousands of bitmaps with the Raptor or K600 which we will prepare but the inkjet allows only 200 variable bitmaps per box....
Printing Covid ID Card with High Security
General: printing secure COVID ID cards This document shows how to set up a job where specially made QR codes are linked in the data to be able to print a Covid ID card like the one shown below:I am going from the enclosed example jpg that we received from you, where...
W10-RTX64 Licensing
General This document shows how to enter the RTX64 license number and some information about windows 10. Unlike older RTX, RTX64 makes you enter a long key while the Windows 10 is connected to the internet. Apparently, it connects the license to the harddisk. That is,...
Windows 10 Editor GT Replacement
Issue I have a Windows 7 EditorGT but my customers want me to go to Windows 10 for security reasons, that is, Windows 7 is not anymore supported by Microsoft. I want to keep the costs down, I can’t afford to buy an expensive controller and an inkjet on top of that, or...
AES256 Encryption for the GT Controller
General Increasingly, our customer’s customers are demanding that the data they provide is protected in the plant, that is, that the data is encrypted with the latest and safest encryption standards, no ASCII files permitted anymore. For that reason, GTUS has gone...
PDF to Bitmap V2.13
Issue I want to rip and print PDF files in real-time with the Kyocera integrated into the GT controller, I want to print odd pages with inkjet 1 and even pages with inkjet 2. How do I do that? 83157 PDF Workstation with GTUS conversion software for first server. 50%...
MCS Eagle or GTUS eZinkjet Copy
Issue I have to decide whether to buy an MCS Eagle or a GTUS eZ-inkjet. What is the difference between both ? Let’s check the head technology The MCS Eagle, like the Raptor we sell, is based on Kyocera heads that came out around 8 years ago. They have 16 rows of...
Label Printing from the Address File Copy
Issue I want to print a label with a zebra printer that contains just the products that made it to the end of the machine (false reads with an “X” in front, plus 2 texts from the data file. This works from version 3.13P68 on. Setup: Set in...
Label Printing from the Address File
Issue I want to print a label with a zebra printer that contains just the products that made it to the end of the machine (false reads with an “X” in front, plus 2 texts from the data file. This works from version 3.13P68 on. Setup: Set in...
1 processor for eZ-inkjet
Issue I get stops in the inkjet after 500 or 1,5000 products, randomly. Please make sure of below. Settings of the inkjet mini PC Go to All Programs/RTX/Intervalzero and make sure in RTX properties / Control / Settings That it is set exactly like below. To...
eZ-Set Voltages Once
Issue I get “Please set the voltages at least once on power cycle”What do I do ? Explanation We used to set the voltage every time at start production, that takes 20-40 seconds. Now, we only set it once to save time starting production. Set voltage If it says...
eZ-inkjet update firmware
Issue I need to update the firmware of the eZ-inkjet. The current software for Rev 3 driver boards is E004_001s and the fpga is X110_000n The current software for Rev 5 driver boards is E004_000u and the fpga is L005_001f How do I do that ? How do I know what Rev...