Issue
I received a GT-Jet 108 with a rotary encoder.
What do I have to enter in the inkjet (GT-Print) and in the controller (GT-MIC)
Setup Inkjet
The rotary encoder has only 1 signal, it makes 11,900 pulses per revolution, the diameter is 78,489 micrometer. Input the undersigned values in GT-Print.
Please measure also the thickness of your paper and input it, yes it makes a difference.
Setup Controller
In the controller, go to the shaft encoder / configuration tab and input pulses per meter.
Following above, we have 11,900 pulses in 3.1416 x 78.489 mm = 48,263 pulses per meter