News & Events

GT Controller to Base Unit

BLUE: Ethernet PC to RIP 1 on Base Unit, Below Ethernet is to connect to in-house LAN to move data. Normally, RIP1 is 192.168.198.60, RIP2 is 192.168.198.61

RED: Print-go and Shaft encoder 1. Below RJ45 connectors go to 2, 3, 4 to Base Unit 2, 3, 4

GREEN: Shaft encoder cable 1, below is shaft encoder 2 (second belt)

PURPLE: gray I/O Box 1 or I/O 1-4, below is I/O Box 2 or 5-8