Issue
We want to run a second eZ-inkjet on the same controller, how do I do that ?
You have to up by one all eZ IPs:
- The NUC from 192.168.198.54 to 192.168.198.55
- The Lykos RIP from 192.168.198.101 to 192.168.198.102
- The cabinet IP from 192.168.198.201 to 202
Make sure the Startup is calling start_ez_jet.bat
The NUC from 192.168.198.54 to 192.168.198.55
In Control Panel/Network/TCP/IPv4
The Lykos RIP from 192.168.198.101 to 192.168.198.102
Set the DIP-SWITCH 2 down for 103
Set the DIP-SWITCH 1 & 2 down for 104
And so on
The cabinet from 192.168.198.201 to 192.168.198.202
Select IP Address in Setup menu
Go with Enter to 201 and press the + button (2nd button here)
Ping everything from controller to make sure