I have for example a double card and I want to eject this product or stop the line.
How do I do this?
Define a reorder point in you configuration. See below “Bad Signal (Caliper).
If not checked, the controller expects a signal after 30950 within 297 mm. If no signal then, product bad !
If checked, the controller expects no signal after 30950 within 297 mm. If signal then, product bad ! The opposite of before. Right what I think you want to achieve with the double detector.
If you set the max. no errors in Sequence to 0, it will release a stop also like in the SR50 line.
Nothing related to bad signal. By the way, you can also check whether the product that just hit the reorder photocell must be a rejected or a good.