Issue
I want to change the ink in a raptor, How do I do that ?
Quick answer: you should order the raptor with the ink you want to run. There is always a possibility that inks are not compatible and that you clog the head.
But if you absolutely need to change the ink, please see below procedure.
Take the ink bottle off the ink suction and empty the tank.
Put a flush bottle of the ink you just emptied and fill the tank with it.
Take the flush bottle off the ink suction and empty the tank.
Change the ink filter.
Put a flush bottle of the ink want to fill with and fill the tank with it.
Take the flush bottle off the ink suction and empty the tank.
Take the new ink and fill the tank. You are done.
See below further explanations to accomplish 1 to 7.
Service Menu:
You can empty (and fill) the tanks from the Print System menu
Ink pump, ink filter is inside the cabinet for inkjets with 1, 2, or 3 heads:
Ink filter, unscrew this to take out the assembly
Ink pump, ink filter is inside the cabinetfor heads with 1, 2, or 3 heads:
Unscrew these 2 white screws to take out the ink filter. Keep the fittings.